Using the s412v/s112, Connecting, Specifications – Yamaha DG100-212A EU User Manual

Page 16

Advertising
background image

16

S412V/S112

Using the S412V/S112

Connecting

1.

Turn the amp’s power OFF and set the volume

to “0”.

* Connecting the speaker with the power ON or the vol-

ume turned up may result in damage to the speaker
or amp.

2.

Using the supplied speaker cord, connect the

phone jack located on the back of the S412V/

S112 cabinet to the amp head’s speaker out-

put jack (the SPEAKER jack on the DG Series

Amplifier).

The S412V is a speaker enclosure equipped with four Celestion “Vin-

tage 30” speakers.

* The power rating is 240 W. Use an amp head with a power

output of less than 240 W.

* The impedance is 8

. Check the amp head’s impedance and

make sure it meets the speaker’s requirements.

* If you use more than two speakers, make sure the total im-

pedance meets the amp head’s requirements. See “Connect-

ing Speakers” section on page 8.

The S112 is a speaker enclosure equipped with a Celestion “G12H-

100” speaker.

* The power rating is 100 W. Use an amp head with a power

output of less than 100 W.

* The impedance is 8

. Check the amp head’s impedance and

make sure it meets the speaker’s requirements.

* If you use more than two speakers, make sure the total im-

pedance meets the amp head’s requirements. See “Connect-

ing Speakers” section on page 8.

Specifications

Speakers

30 cm speaker (Celestion “Vintage 30”) x 4

Power Rating

240 W

Impedance

8

Dimensions

765 x 820 x 359 mm

(WxHxD)

(30.1” x 32.2” x 14.1”) (w/casters)

Weight

44.0 kg (97 Ibs) (w/casters)

Accessory

Speaker Cable

Speaker

Speaker Size

30 cm (12”)

Voice Coil Size

44ø mm

Magnet

Ferrite 1.42 kg (50 oz)

Frequency Range

70 Hz – 5 kHz

Sensitivity

100 dB (1 m/W)

Power Rating

60 W (RMS)

Nominal Impedance

8

Fundamental Frequency

70 Hz

* Specifications and external appearance are subject to change without notice.

Specifications

Speaker

30 cm speaker (Celestion “G12H-100”) x 1

Power Rating

100 W

Impedance

8

Dimensions

542 x 510 x 284 mm

(WxHxD)

(21.3” x 20” x 11.2”)

Weight

16.0 kg (35 Ibs 4.4 oz)

Accessory

Speaker Cable

Speaker

Speaker Size

30 cm (12”)

Voice Coil Size

44ø mm

Magnet

Ferrite 1.42 kg (50 oz)

Frequency Range

82 Hz – 5.5 kHz

Sensitivity

100 dB (1 m/W)

Power Rating

100 W (RMS)

Nominal Impedance

8

Fundamental Frequency

82 Hz

* Specifications and external appearance are subject to change without notice.

Advertising
This manual is related to the following products: