ALLIED Vision Technologies Manta G-917 User Manual
Page 8
Manta Technical Manual V7.0.1
8
Introduction
continued from last page
V3.0.0
[continued]
09.06.10
[continued]
[continued]
•
With the new firmware 1.40 due to a bug all Manta models
have only 12 bit in the data path (even if the ADC delivers
14 bit): See
Figure 76: Block diagram monochrome camera
(type A, Manta G-031 / 032 / 033 / 046 / 095 / 125 / 145 /
146 / 201 / 504)
on page 118 and
color camera (type A, Manta G-031 / 032 / 033 / 046 / 095
/ 125 / 145 / 146 / 201 / 504)
•
Due to a repaired bug in FPGA and microcontroller, the
StreamHoldCapacity changed: Manta G-032 from 49 frames
to 99 frames, Manta G-125 from 12 frames to 25 frames: see
chapter
•
RGBA24 and BGRA24 are not supported, see chapter
•
Manta board level cameras have now a cooling plate: see
– chapter
Manta board level (PoE): dimensions
– chapter
Manta board level (PoE): C-Mount
– chapter
Manta board level (PoE): CS-Mount
– chapter
Manta board level (PoE): M12-Mount
•
Added chapter
Firmware update
on page 87
V4.0.0
25.10.10
•
Added the information, that description of status LEDs can
be found in Manta Hardware Installation Guide, see
•
Changed file format from FM7 to FM9
Added Manta G-033B/C (sensor: Sony ICX 414) and
Manta G-504B/C (sensor: Sony ICX 655):
•
•
•
•
•
Table 42 : Image memory size (typical; see note above)
•
Resolution and ROI frame rates
•
Manta angled head models: chapter
to be continued on next page
Version
Date
Remarks
Table 1: Document history