Alcatel Alcatel One Touch Vibe Mobile Phone OT-800 - Manual (Page 11)

19 20
Charging the battery
Connect the battery charger
• Charging may take about 20 minutes to start if the battery is flat.
• Be careful not to force the plug into the socket.
• Make sure the battery is correctly inserted before connecting the
charger.
• The mains socket must be near to the phone and easily accessible
(avoid electric extension cables).
• When using your telephone for the first time, charge the battery fully
(approximately 3 hours). You are advised to fully charge the battery
( ).
The charge is complete when the animation stops. Only use
Alcatel chargers.
2.2 Power on your phone
Hold down the key until the telephone powers on, type in your PIN
code if necessary and then confirm with the
key. The main screen is
displayed.
If you do not know your PIN code or if you have forgotten it,
contact your network operator. Do not leave your PIN code with
your telephone. Store this information in a safe place when not in
use.
If cell broadcast messages are displayed, use the key to browse
through them or press the right softkey to return to the main screen.
While the phone is searching for a network, “Searching/Emergency”
will be displayed.
In the power on screen, you also have access to the functions of “Radio”,
“Camera”, “Music player”, etc. even if there is no SIM card inserted.
2.3 Power off your phone
Hold down the key from the main screen.
Installing or removing the battery
Insert and click the battery into place, then close the telephone cover.
Unclip the cover, then remove the battery.