Acer 3020 - Manual (Page 35)

Chapter 2 29
BIOS Setup Utility
The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/
Output System).
Your computer is already properly configured and optimized, and you do not need to run this utility. However, if
you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4
Troubleshooting when problem arises.
To activate the BIOS Utility, press m during POST (when “Press <F2> to enter Setup” message is prompted
on the bottom of screen).
Press m to enter setup. The default parameter of F12 Boot Menu is set to “disabled”. If you want to change
boot device without entering BIOS Setup Utility, please set the parameter to “enabled”.
Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without
entering BIOS SETUP Utility.
PhoenixBIOS Setup Utility
. Info.
Main Advanced Security Boot Exit
CPU Type : Mobile AMD Sempron(tm) ProcesIntel (R) Celeron (R) M processor
CPU Speed :
System BIOS Ver: V0.06A
VGA BIOS Ver BK-ATI VER008.025M.000.000
KBC Ver 01.17
Serial Number xxxxxxxxxxxxxxxxxxxxxx
Asset Tag Number N/A
Produc
t Name
TravelMate 4400
Manufacturer Name: Acer
UUID: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select 4 Sub - Menu F10 Save and Exit
HDD Model Name :
HDD Serial Number :
ST960821A - (PM)
None
22 Byte
32 Byte
16 Byte
16 Byte
32 Byte
1.80 GHz
ATAPI Serial Number : None
ATAPI Model Name : TSSTcorpCD/DVDW TS-LS32A - (SM)
System Utilities
Chapter 2
download service manual and resetter printer at http://printer1.blogspot.com