Acer 3020 - Manual (Page 40)

34 Chapter 2
Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
.
Parameter Description Options
Infrared Port Enables, disables or auto detects the infrared port. Disabled /Disabled/Auto
Base I/O address Sets the I/O address of the infrared port. 2F8 /278
Interrupt Sets the interrupt request of the infrared port. IRQ3 /IRQ5
DMA channel Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP. DMA3 /DMA1
Serial Port A Enables. disables or auto detects the serial port A. Enabled /Disabled/Auto
Parallel Port Enables, disables or auto detects the parallel port. Enabled /Disabled/Auto
PhoenixBIOS Setup Utility
Info. Main Advanced Security Boot Exit
Item Specific Help
Infrared Port (FIR)
Base I/O address:
Interrupt:
DMA channel:
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
F1 Help ↑ ↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select 4 Sub - Menu F10 Save and Exit
Parallel port:
[Enabled]
[2F8]
[IRQ 3]
[DMA 1]
[Disabled]
Legacy USB Support [Enabled]
Serial port A: [Disabled]
download service manual and resetter printer at http://printer1.blogspot.com