AT&T System 25 - Manual (Page 50)

Park
Parked calls are similar to held calls except that they can be
picked up from any telephone. If a parked call is not picked up
within a preset interval (the usual time is two minutes), it will
ring at the telephone that parked the call. You can only park one
call at a time from your telephone.
Parking a Call
1 Press
The light next to the button of the call on hold blinks.
2 Press and listen for dial tone.
3 Press
4 Listen for confirmation tone and dial tone.
5 If the call is for someone else, dial or page that person,
notifying them of the extension number where the call is
p a r k e d .
NOTE: If the person does not answer, press the button next
to the blinking light and complete your conversation with the
c a l l e r .
6 Hang up.
Picking Up Parked Calls
1 Listen for dial tone, then press
2 Dial the extension number where the call is parked.
47