Lincoln Electric IM10038 POWER WAVE C300CE - Manual (Page 37)

B-17 OPERATION B-17
RECALLING A MEMORY
To recall the selected memory, press and hold cen-
ter knob for (1 second). After recalling a memory, a
message will briefly appear indicating that the select-
ed memory has been recalled. The Memory LED will
remain lit so that the user can quickly recall a different
memory if needed.
1. Press the Left Push Button until Memory 'M'
LED is illuminated.
2. Rotate center knob to cycle to desired memory
location.
3. Press and hold center knob for 1 second. The
selected memory is now active.
SAVING A MEMORY:
To save the current machine settings to the selected
memory, press and hold the center knob for (2 sec-
onds). After two seconds, the alphanumeric displays
will show “Memory # Save Memory” at which time
the center knob should be released. After saving to a
memory, a message will briefly appear indicating that
the selected memory has been saved.
1. Press the Left Push Button until Memory 'M'
LED is illuminated.
2. Rotate center knob to cycle to desired memory
location.
3. Press and hold center knob for 2 seconds. The active
procedure will be saved into the selected memory.
POWER WAVE® C300 CE
+ +
A
5.00 15.5
Job1
Steel
CV 1.2mm
CO2
V
M 4T
“M Led”
+ +
A
Job4
20.0 4.50
Stainless
Pulse 1.0mm
Ar Mix
V
M 4T
1 SECOND
Press
+ +
A
4.50 20.0
Memory 4
Recalled
V
M 4T
Press and Hold Knob for
1 second. Memory is active.
+ +
A
4.50 20.0
Memory 4
Recalled
V
M 4T
“Press and Hold Knob
2 Seconds to save Memory”
+ +
A
4.50 20.0
Job1
Steel
CV 1.2mm
CO2
V
M 4T
“M Led”
+ +
A
Job4
20.0 4.50
Stainless
Pulse 1.0mm
Ar Mix
V
M 4T
2 SECONDS
Press