Yokogawa EJA115 - Manual (Page 19)

IM 01C22T03-00E 4-4
4. GETTING STARTED
4.5 Starting FDT frame application
The following section describes how to run DTM with
FieldMate.
For the detailed information on FieldMate, see its
User’s manual.
IMPORTANT
Before running the program, log-in to Windows
as an Administrator or as a user with administra-
tive authority.
Start FieldMate
Start FieldMate as followings:
Click [Start]
→ [All Programs] → [YOKOGAWA
FieldMate]
→ [FieldMate]
Select [(none)] and then click [OK]
Figure 4.3 Selection of the communication protocol
Open Network Configurator
In the FieldMate window, click [Tool]
→ [Network
Configurator]
Figure 4.4 Open Network Configurator
Add Communication Path
In the Network Configurator window, click [Action]
→
[Add communication Path].
Enter a description of the communication path and then
click [OK].
Figure 4.5 Communication Path Description
Add COMM DTM
In the Network Configurator window, click [Action]
→
[Add COMM DTM]
→ [OK].
Figure 4.6 COMM DTM Catalog