Yokogawa EJA115 - Manual (Page 38)

IM 01C22T03-00E 9-2
9. GENERAL SPECIFICATIONS
9.2 Optional Specifications
For items other than those described below, refer to
the appropriate user’s manual.
Item Description Code
Factory Mutual (FM)
CENELEC ATEX (KEMA) Flameproof Approval * 2
Certificate: KEMA 02ATEX2148
II 2G EEx d IIC T4, T5 and T6, Amb. Temp.: Ϫ 40 to 80 Њ C ( Ϫ 40 to 176 Њ F) for T5,
Ϫ 40 to 75 Њ C ( Ϫ 40 to 167 Њ F) for T4 and T6
Max. process Temp.: T4; 120 Њ C (248 Њ F), T5; 100 Њ C (212 Њ F), T6; 85 Њ C (185 Њ F)
Enclosure: IP67
CENELEC ATEX Type n Approval * 2
II 3G Ex nL IIC T4, Amb. Temp. –40 to 60
°
C (–40 to 140 Њ F), Enclosure: IP67
Ui=32V, Ci=3.52 nF, Li=0
µ
H
CENELEC ATEX (KEMA) Intrinsically Safe Approval * 2
Certificate: KEMA 02ATEX1344X
[Entity model]
II 1G EEx ia IIC T4, Amb. Temp.: Ϫ 40 to 60 Њ C ( Ϫ 40 to 140 Њ F)
Ui=24.0 V, Ii=250 mA, Pi=1.2 W, Ci=1.76 nF, Li=0 ␮ H
[FISCO model]
II 1G EEx ia IIC T4, Amb. Temp.: Ϫ 40 to 60 Њ C ( Ϫ 40 to 140 Њ F)
Ui=17.5 V, Ii=360 mA, Pi=2.52 W, Ci=1.76 nF, Li=0 ␮ H
II 1G EEx ia IIB T4, Amb. Temp.: Ϫ 40 to 60 Њ C ( Ϫ 40 to 140 Њ F)
Ui=17.5 V, Ii=380 mA, Pi=5.32 W, Ci=1.76 nF, Li=0 ␮ H
Enclosure: IP67
KF25
KN25
CF15
KS25
CENELEC ATEX
FF15
FS15
FM Explosionproof Approval * 1
Explosionproof for Class I, Division 1, Groups B, C and D
Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
Hazardous (classified) locations, indoors and outdoors (NEMA 4X)
Temperature class: T6 Amb. Temp.:–40 to 60
°
C (–40 to 140
°
F)
FM Intrinsically Safe Approval * 1
[Entity Model]
Cl. I, II&III, Division 1, Groups A, B, C ,D, E, F&G, Temp. Cl. T4 and Cl. I, Zone 0,
AEx ia IIC, Temp. Cl. T4
Groups A, B, C, D, E, F&G and Group IIC:
Vmax.= 24 V, Imax.= 250 mA, Pi= 1.2 W, Ci= 3.52 nF, Li= 0 µ H
[FISCO Model]
Cl. I, II&III, Division 1, Groups A, B, C, D, E, F&G, Temp. Cl. T4 and Cl. I, Zone 0,
AEx ia IIC, Temp. Cl. T4
Groups A, B, C, D, E ,F&G and Group IIC:
Vmax.= 17.5 V, Imax.= 360 mA, Pi = 2.52 W, Ci = 3.52 nF, Li = 0
µ H
Groups C, D, E, F&G and Group IIB:
Vmax.= 17.5V, Imax. = 380 mA, Pi = 5.32W, Ci = 3.52 nF, Li = 0 µ H
Nonincendive for Cl. I, Division 2, Groups A, B, C&D, Temp. Cl. T4
and Cl. I, Zone 2, Group IIC, Temp. Cl. T4
and Cl. II, Division 2, Groups F&G Temp. Cl. T4
and Cl. III, Division 2, Temp. Cl. T4
Vmax.= 32 V, Ci = 3.52 nF, Li = 0
µ H
Enclosure: “NEMA4X”, Amb. Temp.: –40 to 60
°
C (–40 to 140 Њ F)
T0903.EPS
CSA Explosionproof Approval * 1
Certificate: 1010820
Explosionproof for Class I, Division 1, Groups B, C and D
Dustignitionproof for Class II/III, Division 1, Groups E, F and G
Temp. Class: T4, T5, T6 Encl Type 4x Amb. Temp.: –40 to 80
°
C (–40 to 176
°
F)
Max. Process Temp.: T4; 120 ° C (248 ° F), T5; 100 ° C (212 ° F), T6; 85 ° C (185 ° F)
Process Sealing Certification
Dual seal certified by CSA to the requirement of ANSI/ISA 12.27.01
No additional sealing required. Primary seal failure annunciation : at the zero adjust-
ment screw
Canadian Standards
Association (CSA)
*1: Applicable for Electrical connection code 2 and 7.
*2: Applicable for Electrical connection code 2, 4, 7 and 9.