Advantech EKI-1351 - Manual (Page 21)

15 EKI-1351/1352 User Manual
Chapter 2
G
etting
Started
2.3.3 DIN-rail Mounting
You can mount the EKI-1351/1352 on a standard DIN rail. The DIN-rail kit is screwed
on the serial device server when out of factory. If the DIN-rail kit is not screwed on the
serial device server, please screw the DIN-rail kit on the serial device server first.
First, hang the EKI-1351/1352 to the DIN-rail with angle of inclination. See below.
Figure 2.12 DIN-rail Step 1
Then, let the device down straight to slide over the rail smoothly.
Figure 2.13 DIN-rail Step 2