Advantech EKI-1351 - Manual (Page 53)

47 EKI-1351/1352 User Manual
Chapter 3
C
onfiguration
3.6.3 Lock Device
The configuration utility provides Lock Device function (password protection), when
you use this function you need to fill in a set of password. Then, other host computers
will no longer to configure this device server. Notice that you need to "Reset Device"
in order to store password into the device server.
If you want to unlock the device server, right click on the device name and select the
“Unlock Device”. You need to fill in the password you have set before to unlock the
device server. If you forgot the password, the only way to solve this problem is to
restore the setting of device server to factory default which will be introduced later.
If you want to disable the password protection, you need to change password to
default "None" (leave the new password dialogue box blank and press "OK". Please
remember to reset the device server to save the setting.
3.6.4 Restore to Factory Default Settings
The utility provides a method to let you restore the device server to factory default
setting. While you select this function, a confirm message will be pop-up. If you really
want to restore the device server to factory default setting, please click “Yes” button
to continue.
Then, please power off the device server within ten seconds, after reconnecting the
power back, the setting will be reset to the factory default. If the power remains more
than ten seconds, the device server will not have any change.