KROHNE OPTITEMP TT 50 C-R EN - Manual (Page 23)

OPERATION
5
23
OPTITEMP TT 50 C/R
www.krohne.com 09/2010 - 4000636502 - MA OPTITEMP TT 50 C/R R03 en
5.2 Factory settings for configuration
The transmitter are delivered with either a factory settings or configured according to
customers' specifications.
DANGER!
Only connect an Ex approved HART
® modem located in a safe area to a transmitter in a
potentially explosive area.
Menu Parameter Factory settings
Device Root
menu
-> Sensor Type of sensor 1 RTD Pt100 α=0.003850
Number of wires 3
PV Lower range value 0
PV Upper range value 100
Digital units ° C
Lock code Unlocked
Isolation resistance monitoring Off
Sensor break (Off/Down scale/Up scale) Up scale
Sensor short circuit (Off/Down scale/Up scale) Off
Span 0...+100°C / +32...+212°F
.book Page 23 Monday, September 13, 2010 5:07 PM