Brother PJ-622 - Manual (Page 45)

Brother PJ-600 Series Command Reference 43
© 2011 Brother Industries, Ltd. All Rights Reserved.
6.1. USB/Bluetooth/IrDA Printing flow
PC(Host) Printer Unit
③ Print data 2nd page
（ Send the Form feed command for the end of page）
・・・・ Continue in the same way・・・・
⑥ Status(Edit Phase Status)
⑤ Status(Complete Printing Status)
④ Status(Start printing status)
③ Print data 1st page
（ Send the Form feed command for the end of page）
② Status (response to status information request)
① Initialize＋Status information request If there are no problems with
the machine status (media,
etc.), the data is transmitted. The status of the machine
(media, etc.) is checked and a
response is sent.
Sending display Receive data
Start printing Printing display
Printing
Printing
Finishing process for
printing 1st page.
⑦ Printing is finished when
the status (phase change:
Receiving state) is received.
Receive data Send data for
2nd page.
Start printing
Description
① Initialize(ESC+ @) + Status information request (ESC + i + S)
② Status(response to Status information request)
Refer to “ 4.2.5. Status type ”.
However, if an error has already occurred on the machine, the machine returns “error occurred” as
the status type. For details, refer to “ 4.2.2. Error information 1/2 ”.
③ Print data
Print command for 1 page. Refer to “ 3.1. Print data overview ”.
④ Status (Start printing status)
Status indicating that printing has started
Indicates “printing” as the “phase number” with “printing state” as the “phase type” and “phase change”
as the “status type”.