Brother MFC-J435W - Manual (Page 36)

32
Cleaning the machine’s
printer platen
A
WARNING
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid an electrical shock.
a
Using both hands, grasp the plastic tabs
on both side of the machine to lift the
scanner cover into the open position.
b
Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
c
Using both hands, grasp the plastic tabs
on both sides of the machine and gently
close the scanner cover.
d
Re-connect the power cord.
Cleaning the paper pick-up
rollers
A
a
Unplug the machine from the AC power
outlet.
b
Pull the paper tray completely out of the
machine.
Note
If the machine starts to multi-feed the last
few sheets of paper in the tray, clean the
Base Pad (1) with a soft lint-free cloth
moistened with water.
After cleaning, wipe the pad with a dry,
soft lint-free cloth to remove all moisture.
1
1