About bobbin work, Included accessories, About bobbin work included accessories – Brother Bobbin work kit for Innov-is 4000D User Manual
Page 3
2
ABOUT BOBBIN WORK
You can create designs, which gives a three-dimensional appearance to the surface of the fabric, by winding the
bobbin with heavy weight thread or ribbon too thick to be fed through the sewing machine needle and sewing on
the wrong side of the fabric.
Bobbin work is sewn using the special bobbin case (gray) and bobbin cover with tabs included with this kit.
INCLUDED ACCESSORIES
Utility stitches
Decorative stitches
(For models with built-in
decorative stitches)
Free-motion sewing
1.
2.
3.
4.
Bobbin case (gray)
(XE8298-001)
Bobbin cover with tabs
(*See Note.)
Screwdriver (small)
(X55468-051)
CD-ROM (Contains the Operation
Manual and the Templates for free-
motion sewing.)
(USA/CANADA: XE9382-001,
Other areas: XE9501-001)
Note
• Two bobbin covers may be included, depending on the country or region
where this kit was purchased. Use the bobbin cover with the same shape as
the bobbin cover included with your machine. The bobbin cover with a shape
different than that included with your machine cannot be installed on the
machine.
(XE8992-001)
(XE8878-001)