Chapter 4 troubleshooting, Identifying your problem, Identifying your problem -1 – Brother HL-1240 User Manual
Page 75
CHAPTER 4 TROUBLESHOOTING
4-1
CHAPTER 4
TROUBLESHOOTING
Identifying your problem
First, check the following:
•
The power plug is connected correctly and the printer is turned on.
•
All of the protective parts have been removed.
•
The toner cartridge and drum unit are installed correctly.
•
The Front Cover is fully closed.
•
Paper is inserted correctly into the paper cassette.
•
The interface cable is securely connected between the printer and computer.
•
The correct driver for the printer is installed and selected.
•
The PC is set up to connect to the correct printer port.
Printer does not print
If you did not solve your problem with the above checks, please find your problem in the
following list and refer to the section listed.
•
•
•
•
Printer LED is blinking
Go to ‘Control Panel Indications’ on page 4-2
•
•
•
•
Status Monitor Error
Message appears
Go to ‘Error messages in the Status Monitor’
on page 4-6
•
•
•
•
Printed Error Message
Go to ‘Error Messages printouts’ on page 4-8
•
•
•
•
Paper Handling
Go to ‘Paper Handling’ on page 4-10
‘PAPER JAMS and how to clear them’ on
page 4-11
•
•
•
•
Others
Pages are printed, however there are problems with:-
•
•
•
•
Print quality
Go to ‘Improving the print quality’ on page 4-
18
•
•
•
•
Printout is incorrect