Important information: regulations, Radio interference (220 to 240 volt model only), Internal laser radiation – Brother HL-6050DN User Manual
Page 170
APPENDIX (FOR EUROPE AND OTHER COUNTRIES) B - 2
Important information: Regulations
Radio interference (220 to 240 volt model only)
This printer follows EN55022 (CISPR Publication 22)/Class B.
Before you use this product, make sure that you use the following interface cables.
1
A shielded parallel interface cable with twisted-pair conductors and that it is marked IEEE1284
compliant.
2
A USB cable.
The cable must not be more than 2 meters long.
IEC 60825 specification (220 to 240 volt model only)
This printer is a Class 1 laser product as defined in IEC 60825 specifications. The label shown below is
attached in countries where it is needed.
This printer has a Class 3B laser diode which produces invisible laser radiation in the scanner unit. You
should not open the scanner unit under any circumstances.
Caution:
Use of controls or adjustments or performance of procedures other than those specified in this User’s
Guide may result in hazardous radiation exposure.
Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän
turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.
Varning
Om apparaten används på annat sätt än i denna Bruksanvisning specificerats, kan användaren
utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
Internal laser radiation
Maximum radiation power:
15 mW
Wave length:
760 - 810 nm
Laser class:
Class 3B (Accordance with IEC 60825)
For Finland and Sweden
LUOKAN 1 LASERLAITE
KLASS 1 LASER APPARAT
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT