Brother HL-4040CDN - Manual (Page 54)

Driver and Software
45
3
Accessories tab
3
When you install the optional accessories, you can add and choose their settings in the Accessories tab as
follows.
Available Options (1)
You can manually add and remove the options that are installed on the printer. Tray settings will match
the installed options.
Paper Source Setting (2)
This feature recognizes the paper size set from the control panel menu for each paper tray.
Serial No. (3)
By clicking Auto Detect, the printer driver will probe the printer and display its serial number. If it fails to
receive the information, the screen will display "---------".
Auto Detect (4)
The Auto Detect function finds the currently installed optional devices and serial No. and then shows the
available settings in the printer driver. When you click Auto Detect, options that are installed on the printer
will be listed in Available Options (1). You can manually add or remove the options by choosing an
optional device you want to add or remove, and then clicking Add or Remove.
Note
The Auto Detect function is not available under the following printer conditions:
• The printer power switch is off.
• The printer is in an error state.
• The printer is in a network shared environment.
• The cable is not connected to the printer correctly.
1
2
3
4