Brother HL-4040CDN - Manual (Page 83)

Control Panel
74
4
Reprinting documents
4
Reprinting the last job
4
You can reprint the data from the last print job without sending it from the computer again.
Note
• If the Reprint setting is set to Off on the control panel and you press Reprint, the LCD shows
No Data Stored for a short time.
• If you want to cancel reprinting, press Cancel.
• If the printer does not have enough memory to spool the print job data, it will not print the document.
• Pressing the - or + button makes the number of reprint copies decrease or increase. You can choose
between 1 and 999 Copies.
• For more information about the settings in the printer driver, see Device Options on page 42.
• After turning the power switch off, the last job data will be deleted.
How to reprint the last job
4
a
Make sure that the Reprint setting is On by using the buttons on the control panel to enter the General
Setup
menu.
Note
If you print with the printer driver we have supplied with the printer, the settings for Job Spooling in the
printer driver will take priority over the settings made on the control panel. (For more information, see
Device Options on page 42.)
b
Press Reprint.
c
Press OK.
Reprint Menu
Last Job
d
Press the + or - button to choose Print. Press OK.
Last Job
Print
e
Press the + button twice to enter the number of copies you want.
Last Job
Copies =3
f
Press OK or Go.
Printing
h
Last Job
Print