Brother HL-4040CDN - Manual (Page 99)

Control Panel
90
4
Calibration
4
The output density for each color may vary depending on the environment the machine is in such as
temperature and humidity. Calibration helps you to improve the color density.
a
Press the + or - key to choose Color Correction. Press OK.
Select ab or OK
Machine Info.
h
Select ab or OK
Color Correction
b
Press OK.
Color Correction
ColorCalibration
c
Press OK.
ColorCalibration
Calibrate
d
Press OK again.
Calibrate
OK?
You can reset the calibration parameters back to those set at the factory.
a
Press the + or - key to choose Color Correction. Press OK.
Select ab or OK
Machine Info.
h
Select ab or OK
Color Correction
b
Press OK.
Color Correction
ColorCalibration
c
Press the + or - key to choose Reset. Press OK.
ColorCalibration
Reset
d
Press OK again.
Reset
OK?