For network interface cable users (for hl-6050dn), For mac os® 8.6 to 9.2 users, For mac os – Brother HL-6050DN User Manual
Page 30: 6 to 9.2 users, Connecting the printer to your macintosh, Installing the ppd file
29
Connecting the Printer to your Macintosh
®
& Installing the PPD File
1
Turn off the printer’s power switch.
2
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3
Turn on the printer’s power switch.
4
Insert the CD-ROM for Macintosh
®
into your
CD-ROM drive.
Open the Mac OS
®
9 folder.
Open your langauge folder.
5
Double-click the PPD Installer icon to install
the PPD file.
Follow the on-screen instructions.
6
From the Apple menu, open the Chooser.
7
Click the LaserWriter 8
*1
icon, and then
select BRN_xxxxxx_P1_AT.
*2
Click the Create button.
Close the Chooser.
*1 If the Apple LaserWriter 8 Driver is not
already installed on your system, you
can download it from
http://www.apple.com
*2 xxxxxx are the last six digits of the
Ethernet address.
Setup is now complete.
For Network Interface Cable Users (For HL-6050DN)
For Mac OS
®
8.6 to 9.2 Users
Network User's Guide Chapter 7.
2S
Ma
ci
ntosh
®
Ne
tw
ork
For
Administrator
s
Maci
ntosh
®
USB
Settin
g Up
Your Printer