For network interface cable users, For mac® os 8.6 to 9.2 users, For mac – Brother HL-7050 User Manual
Page 27: Os 8.6 to 9.2 users
25
Connecting the Printer to Your Macintosh & Installing the BR-Script PPD File
1
Turn off the printer power switch.
2
Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
3
Turn on the printer power switch.
4
Insert the CD-ROM into your CD-ROM
drive.
5
Double-click the Start Here! icon.
Follow the instructions on the screen.
6
Click the “Install Software” icon on the Menu
screen. Follow the instructions on the
screen.
7
Open the Chooser from the Apple Menu.
8
Click the LaserWriter8
*1
icon, and then
select BRN_xxxxxx_P1_AT.
*2
Click the Setup... button.
Close the Chooser.
*1 If the Apple LaserWriter8 Driver is not
already installed on your system, you
can download it from
http://www.apple.com
*2 xxxxxx are the last six digits of the
Ethernet address.
The setup is now complete.
For Network Interface Cable Users
For Mac
®
OS 8.6 to 9.2 Users
ON OFF
Hub
ON OFF
Network User’s Guide Chapter 7.
Setting Up
Your Printer
Macintosh
®
Network
Fo
r
Administrator
Macintosh
®
US
B