Brother DCP 8060 - Manual (Page 6)

4
Setting Up the machine
Do NOT connect the interface cable.
Connection the interface cable is
done during the software
installation process.
1
Open the front cover by pressing the front
cover release button (1).
2
Unpack the drum unit and toner cartridge
assembly.
3
Gently rock the drum assembly from side to
side several times to distribute the toner
evenly inside the cartridge.
4
Put the drum unit and toner cartridge into
the machine so that it clicks into the place.
5
Close the front cover of the machine.
1 Install the Drum Unit and Toner Cartridge Assembly
(1)
Step 1