Brother PT-2600 - Manual (Page 85)

78
The Stamp function allows you to quickly and easily create your own stamp stencil films for
customized stamps. After inserting a stamp film cassette, select this function to automatically
center the text and adjust the tape length and margins to a perfect format for the pre-inked
stamp film holders. Since the stamp holder is reusable, just make a new stamp stencil film and
replace the one in the holder.
To make a stamp:
1
Type in the text, and then insert a medium (3/4” (18 mm)-wide) or large (1” (24 mm)-
wide) stamp film cassette.
2 Hold down
c and press U once. The message “STAMP FORMAT?” appears in the
display.
3 Press
_. The text is automatically formatted for the installed stamp: centered within
the preset message area with the tape length and margins automatically adjusted.
4 Press p to cut the text out of the stamp stencil film.
5 After the stamp stencil film is cut off, remove the backing paper from the stamp stencil
film and affix it to the ink pad of a stamp film holder.
CUTE FONT 4 OUTLINE
FORMAL FONT 2 ITALIC
ELEGANT FONT 3 NORMAL
NATURAL FONT 6 NORMAL
CHAR.STYLE
setting
Sample Font setting Style setting
TZ-T
ape
AV
-Label
STAMP FUNCTION