Brother MFC J6910DW - Manual (Page 148)

Scanning
141
9
Scanning a duplex (two-sided) document (For MFC-J6910DW)
9
a Load your document.
b Check Duplex (two-sided) Scanning and choose Long-edge binding or Short-edge binding.
c
Adjust the following settings, if needed, in the scanner setup dialog box:
 Resolution
 Scan Type
 Document Size
 Adjust Image
• Brightness
• Contrast
d
Click Start.
Note
• You cannot adjust the scanning area.
• Duplex scan is available from the ADF only.
• Duplex scan is not available for B4, A3 and Ledger size paper.