Brother HL-5050 - Manual (Page 18)

16
Installing the Driver
Installing the Driver & Connecting the Printer to your Macintosh
1
Click Connect the interface cable &
Install the driver/utility from the Initial
Setup menu.
2
Follow the on-screen instructions, and
restart your Macintosh.
3
Make sure the printer power switch is on.
4
Connect the USB interface cable to your
Macintosh, and then connect it to the
printer.
5
Open the Chooser from the Apple menu.
6
Click the Brother Laser and select
HL-5000 series.
Close the Chooser.
The setup is now complete.
For USB Interface Cable Users
For Mac
®
OS 8.6 to 9.2 Users (HL-5030/5040 Users)
Do not connect the USB cable to the
keyboard USB Port or a non-powered
USB Hub.
Step 2