Brother HL-2070N - Manual (Page 74)

Troubleshooting
6 - 3
6
Error message printout
The printer will report problems by printing an error message as defined in the following table. Take the
corrective actions for the error message.
Error message Action
MEMORY FULL ■ Press the Go button to print the data left in the printer. Cancel the print job if
you want to delete the data remaining in the printer, see Cancel printing on
page 3-7.
■ Reduce the print resolution or reduce the complexity of your document.
PRINT OVERRUN ■ Press the Go button to print the data left in the printer. Cancel the print job if
you want to delete the data remaining in the printer, see Cancel printing on
page 3-7.
■
If this does not clear the error, reduce the complexity of your document or
reduce the print resolution.
■
Set page protection to AUTO by using the supplied Windows ® driver or
Remote Printer Console program.
■
Change the following settings in the supplied Windows ® driver and try again.
The best combination of these settings will vary depending on your
document:
• Graphics mode
• TrueType mode
• Use Printer TrueType ® Fonts
RESOLUTION REDUCED TO
ENABLE PRINTING
(The printer has printed the
document at a reduced
resolution)
■
Reduce the complexity of your document before you print to prevent
automatic reduction in the resolution.