AT&T 8520T - Manual (Page 16)

Abbreviated Dialing ■
To program or reprogram
an outside number,
extension, or feature code
into a personal list
1
2
3
4
5
6
7
8
On a separate sheet of paper, jot down the outside
numbers, extensions, and/or feature codes you want
to program as items on your personal list(s)
Note: Each telephone number or feature code is
stored as a separate list item.
Pick up handset
[dial tone]
Dial Abbreviated Dialing Program code
[dial tone]
Dial personal list number (1, 2, or 3)
Dial list item (1, 2, 3...)
[dial tone]
Dial number you want to program (up to 24 digits)
Note: If you are programming an outside number,
be sure to include a trunk code, if applicable.
Press [ # ]
[confirmation tone]
●
Number is stored
●
Repeat Steps 5-7 if you want to program
additional items on the same list; hang up and
begin again at Step 1 if you want to program
items on another personal list
Hang up to end programming
Note: Keep your own personal lists in the
Abbreviated Dialing table provided in the back of
this booklet; group, system, and enhanced lists are
available from your system manager.
To place a call using a
1 Dial appropriate Abbreviated Dialing List code:
[dial tone]
personal, group, system,
●
List 1
or enhanced list
List 2
●
●
List 3
2 Dial desired list item (1, 2, 3...)
●
Stored number is automatically dialed
13