AT&T 8520T - Manual (Page 19)

To return to a call parked
at your extension
1 Press [ Call Park ]
or Dial Answer Back code
and then your extension number
●
You are connected to call
To retrieve parked call
1 Dial Answer Back code
[dial tone]
from any extension 2 Dial extension where call is parked
[confirmation tone]
Note: If you receive intercept tone, parked call has
been disconnected or retrieved by someone else.
Call Pickup
■
To answer a call to a
1 Press [ Call Pickup ]
member of your pickup
or Dial Call Pickup code
group when your
●
You are connected to ringing call
voice/data terminal is idle
To pick up a call while
1 Press [ Hold ]
you are active on another
●
Present call is put on hold
call
●
Green light flutters
2 Press [ Call Pickup ]
●
You are connected to incoming call
Note: To return to held call after completing pickup
call, press
[ xxxxx ] next to fluttering green light.
16