Canon REALIS WUX10 MARK II D - Manual (Page 103)

103
Setting Various Function
Setting Up Functions fr
om
Menu
s
Initializing network settings
[Other settings] -[Network setting initialization]
You can Initialize the network settings.
Press the OK button after selecting [Net-
work setting initialization], and the follow-
ing screen for confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
• Initialized are “IP address” and other
items set in "Connecting the Projector to
Network" (
P105 ).
• You can do this initialization also from a
Web browser. ( P114 )
Resetting to the Default Setting
[Other settings] - [Factory defaults]
You can reset the menu item settings and
restore the system settings to the factory
defaults.
Press the OK button after selecting [Fac-
tory defaults], and the following screen for
confirmation appears:
Press the OK button to accept your setting
and then press the MENU button.
• This function cannot reset the value of
[Lamp counter], [Language], [Remote
control], [Input signal] and [Network set-
ting] to default.
• For factory defaults settings, refer to the
page 143
-
145 .
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Yes The network settings is initialized.
No Initialization is aborted.
Other settings
System settings
Network setting initialization
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
OK Settings are reset to default.
Cancel Settings are not reset to default.
Other settings
System settings
Factory defaults