Canon REALIS WUX10 MARK II D - Manual (Page 28)

Part Names
28
Top Control
KEYSTONE button
Corrects keystone distortion. (
P55 )
[ ] [ ]: For keystone adjustment.
Press D.SHIFT/KEYSTONE and then AUTO
SET to adjust the keystone automatically.
• Moves the image up, down, left, and right
when [16:9 D. image shift] or [4:3 D. image
shift] is selected. (
P59 , P60 )
• [ ], [ ], [<], [>]:Moves an image to the de-
sired position.
<
<
<
<
MENU button ( P72 )
Displays a menu on
the screen.
AUTO SET button ( P48 )
Performs input signal set-
tings, auto adjustment on fo-
cusing, keystone distortion,
screen color correction, and
so on.
FOCUS button ( P54 )
Adjusts focusing.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
Press FOCUS and then AUTO SET
to adjust the focusing automatically.
<
<
ZOOM button ( P53 )
Adjusts the image size.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
<
<
OK button ( P74 )
Determines the item selected
from the menu.
INPUT button ( P50 )
Switches among input signals.
WARNING lamp ( P118 )
Flashes red when a problem has
been detected on the projector.
POWER button/lamp ( P44 , P64 )
Turns the projector on or off.
Green: The projector is on.
Flashing green: The projector is being turned on.
Red: The projector can be turned on.
Flashing red: The projector is being turned off
(the lamp is being cooled).
Pointer/VOL button ( P73 , P67 )
Adjusts the sound volume.
[<]: Decreases the volume.
[>]: Increases the volume.
Selects the upper, lower, left
or right item in the menu.
AUTO PC button ( P52 )
Adjusts tracking and so on automatically in
accordance with signal from a computer
when ANALOG PC-1 or ANALOG PC-2 is
selected.
LED illumination lamp ( P99 )
Indicates the projector status with LEDs.
Blinking from the left: The projector is
being turned on.
Blinking from the right: The projector is
being turned off.
Middle LED flashing slowly: The image is
being blanked out.
Left and right LEDs flashing slowly: The
image is freezing.