When the language selection screen appears – Canon REALIS WUX10 MARK II D User Manual
Page 45
45
Starting Projection
Proje
cti
ng
an
Im
age
5
Press the AUTO SET button.
Performs auto adjustment on focusing, keystone distortion, input signal settings, and
screen color correction. For more details, refer to the page
.
If the projector is projecting an image properly with [AUTO SETUP], the projection is
complete.
For how to turn off the projector, refer to the page
. Perform the appropriate opera-
tion depending on the following situations.
■When the Language Selection Screen Appears
A window appears when the projector is turned on for the first time. You can select a lan-
guage to be used by the projector for displaying menus and messages in the window.
Select the desired language with the pointer buttons and press the OK button.
You can change the language from the menu at a later time. (
If the language selection screen is out of focus, press the FOCUS and then AUTO SET
buttons to make focus adjustment.
Changing Operations When Projector is Turned On
You can change operations when the projector is turned on as follows:
• You can turn on the projector by connecting the power cord without pressing the
POWER button. (
• You can specify whether to enable or disable the LED illumination lamp. (
• You can change the countdown window. (
)
• You can skip the countdown window. (
)
Using the Power Saving Mode (power management)
When you enable the power management mode, the lamp is automatically turned
off if the projector receives no signal input for a certain period of time. (
)
An item highlighted in orange will be selected.
Remote control
Top control