Canon REALIS WUX10 MARK II D - Manual (Page 90)

Setting the Image Quality
90
Making Color Adjustment (COMPONENT/
VIDEO)
[Color adjustment]
You can adjust the color depth and hue of
images for each of primary colors, red,
green and blue.
When you have completed the adjust-
ment, press the MENU button.
• You cannot adjust the color balance in
[Video] except NTSC.
• The adjustment you have made is
stored as an adjusted value of input sig-
nals being projected in an image mode.
Making Advanced Adjustment (Noise reduc-
tion)
[Advanced adjustment] - [Noise reduction]
You can reduce noise of picture.
Press the OK button to accept your setting
and then press the MENU button.
• Noise reduction may produce an after-
image for quick footage.
• Select [Weak] for quick footage. Select
[Strong] for slow footage.
• The setting you have made is stored as
a setting value of input signals being
projected in an image mode.
• Making this setting makes mark shown
in [Advanced adjustment] in the menu.
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Color level Adjusts the intensity of each
color.
[>] Increases the intensity of color.
[<] Decreases the intensity of color.
Color balance Adjusts the color balance of a
reddish or greenish image.
[>] Corrects a reddish image.
[<] Corrects a greenish image.
R/G/B Gain The same as “Making Color
Adjustment (HDMI)”.
R/G/B Offset The same as “Making Color
Adjustment (HDMI)”.
Color adjustment
Image adjustment
HDMI COMPONENT
DIGITAL PC VIDEO
ANALOG PC
Off Disables noise reduction.
Weak Select this option for noisy picture.
Strong Select this option for excessively noisy
picture.
Advanced adjustment
Image adjustment
Noise reduction