Bosch NET8066SUC - Manual (Page 14)

14
Changing the basic settings
The cooktop must be turned off.
1. Turn on the cooktop with the main switch.
2. Within the next 10 seconds, touch the Timer key for
4 seconds.
In the left display the symbols
™ and ‚ alternate. ‹
lights up on the timer display.
3. Touch the Timer key until the desired indicator
appears on the left display.
4. Select the required setting using the number keys.
5. Touch the Timer key again for 4 seconds. The setting
is activated.
Leaving the basic settings
Turn off the cooktop with the main switch.
™† Automatic timer
‹ Off*
‚ - ŠŠ Automatic shut-off time
™‡ Duration of timer end signal
‚ 10 seconds*
ƒ 30 seconds
„ 1 minute
™ˆ Turning on additional heating elements
‹ Off
‚ On*.
ƒ Last setting before turning off the heating element
™Š Selection time for heating element
‹ Unlimited*: You can adjust the settings of the last heating element used at any time without having to
select it again.
‚ Restricted: You can adjust the settings for the last heating element used within 10 seconds after
selecting it. After that you will have to reselect the heating element before setting it.
™‹ Reset to basic settings
‹ Off*
‚ Reset the appliance to basic settings
Display Function
*factory settings
$MFBO
-PDL
$IJME
-PDL
         
5JNFS
Œ³

$MFBO
-PDL
$IJME
-PDL
         
5JNFS Œž