Acer Aspire T160 - Manual (Page 45)

Chapter 2 36
IDE Function Setup
All on-board peripherals can be set up through this menu.
Parameter Description Options
On-Chip IDE First/Second
Channel The chipset contains a PCI IDE
interface with support for two IDE
channels. Select Enabled to
activate the first and/or second
IDE interface. Select Disabled to
deactivate an interface, if you
install a primary and/or secondary
add-in IDE interface. Enabled
Disabled
IDE Primary/ Secondary Master/
Slave PIO The four IDE PIO (Programmed
Input/Output) fields let you set a
PIO mode (0-4) for each of the
four IDE devices that the onboard
IDE interface supports. Modes 0
through 4 provide successively
increased performance. In Auto
mode, the system automatically
determines the best mode for
each device.
OnChip IDE Channel0 [Enabled]
Primary Master PIO [Auto]
Primary Slave PIO [Auto]
Primary Master UDMA [Auto]
Primary Slave UDMA [Auto]
OnChip IDE Channel1 [Enabled]
Secondary Master PIO [Auto]
Secondary Slave PIO [Auto]
Secondary Master UDMA [Auto]
Secondary Slave UDMA [Auto]
IDE DMA Transfer Access [Enabled]
Serial-ATA 1 [Enabled]
Serial-ATA 2 [Enabled]
IDE Prefetch Mode [Enabled]
IDE HDD Block Mode [Enabled]
SATA PORT Speed Settings [Auto]
F5:Previous Values F7:Optimized Defaults
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
Phoenix - Award BIOS CMOS Setup Utility
IDE Function Setup
Item Help
Menu Level