LG LS840 - Manual (Page 12)

Get Started 2
Set Up Your Phone
You must first install and charge the battery to begin setting up your phone.
1. Install the battery.
 Remove the battery from its packaging.
 Insert the battery into the opening in the back of the phone, making sure the
connectors align (see step 1 in the following illustration). Gently press down to
secure the battery (see step 2 in the following illustration).
 Position the back cover over the battery compartment and press down until you hear
a click (see step 3 in the following illustration).
2. Charge your battery.
 Connect the charging adapter and USB cable as shown; the LG logo on the charging
adapter should face toward you.
 Plug one end of the USB cable into the phone's Charger/Accessory Port and the
other end into an electrical outlet. The charge time varies depending upon the battery
level.
3. Press and hold the Power/Lock Button located on the top right to turn the device
on.
Activate Your Phone
Follow the instructions below to activate your phone if it has not already been activated.
Depending on your account or how and where you purchased your phone, it may be ready to
use or you may need to activate it on your Sprint account.