LG LS840 - Manual (Page 181)

Tools and Calendar 171
Pairing between two Bluetooth devices is a one-time process. Once a pairing has been
created, the devices will continue to recognize their partnership and exchange
information without having to re-enter a passcode again.
Disconnect a Paired Device
Disconnecting a paired device breaks the connection between the device and your LG VIPER™
4G LTE, but retains the pairing. At a later point when you wish to reconnect the device, there is
no need to setup the connection information again.
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap next to the previously paired device (under the
PAIRED PHONES section).
3. Tap Unpair.
Note: Disconnections are manually done but often occur automatically if the paired device
goes out of range of your
LG VIPER™ 4G LTE or if it is powered off.
Send Items via Bluetooth
Depending on your paired phone's settings and capabilities, you may be able to send pictures,
videos, Contacts information, or other items using a Bluetooth connection.
Note: Prior to using this feature, Bluetooth must first be enabled, and the recipient ‟s phone
must be visible. If no phones are detected, tap Search for phones to begin a new
search.
Send Contact Information
1. Tap > > Contacts.
2. Tap an entry to open its details page.
3. Tap > Share > Bluetooth.
4. Tap a paired device.
 The external Bluetooth device must be visible and communicating for the pairing to
be successful.
Send Pictures and/or Videos
1. Tap > > Gallery.
2. Tap an album to open it and view its contents. (The pictures and videos in the album are
displayed in chronological order.)