Developer options – LG LS970 User Manual

Page 183

Advertising
background image

Settings

173

3. If the driver is not installed, the MTP driver will be installed automatically and your PC

will be rebooted. After rebooting, it is possible to transfer any files between the phone
and the PC.

Note: For Windows® XP, the MTP driver is not installed by default. So Autorun will install the

MTP driver automatically after checking existence of the driver. If Windows Media
Player(WMP) over version 10.x is installed on the PC, the MTP driver may be installed.
For Windows® 7 except for N edition, the driver is installed.

USB Tethering

You can use your phone to provide a data connection to a computer by activating data tethering
and connecting them with a USB cable.

To tether your phone with your computer using the USB

1. Connect your phone to your computer with a USB cable.

2. Tap

>

> System settings > PC connection.

3. Tap the USB tethering checkbox, then tap OK if you agree to the prompt.

Note: Data Tethering requires an appropriate data plan. Phones connected by tethering use

data from your plan. Plans are not unlimited and significant charges may be incurred if
the included data allowance is exceeded. Performance may vary depending on the
number of phones connected and other factors.

Ask on Connection

Checkmark to have the phone ask you to choose which USB connection mode it should connect
with to a PC.

Developer Options

Keep in mind that turning on these developer settings may result in irregular device behavior.

To collect information about your current device state, to send as an email message:

1. Tap

>

> Systems settings > Developer options > Take bug report.

2. Read the disclaimer and tap Report.

To set a password to back up the desktop:

1. Tap

>

> Systems settings > Developer options > Desktop backup

password.

2. Enter the current password, new password and confirm the new password, then tap Set

backup password.

Advertising
This manual is related to the following products: