LG LGUN530 - Manual (Page 74)

Settings
Se
ttings
72
Connecting TTY Equipment
and a Terminal
1. Connect a TTY cable to TTY
connection on the terminal
(TTY connection location is
the same as a headset jack).
2. Enter the phone menu and
set the desired TTY mode.
3. After setting a TTY mode,
check the LCD screen of the
phone for the TTY icon.
4. Connect the TTY equipment
to the power source and turn
it on.
5. Make a phone connection to
the desired number.
6. When connection is made,
use the TTY equipment
to type in and send a text
message or send voice.
7. The voice or text message
from the receiver end displays
on the TTY equipment display.
4.4 One Touch Dial
Allows you to initiate a speed
dial call by pressing and holding
the speed dial digit. If set to Off,
Speed Dial numbers designated
in your Contacts will not function.
1. Open the flip and press
[MENU].
Menu Usera Menu
Transmission/
Receiving Mode
When making
communications with
a non-TTY terminal
TTY Full
For hearing-/
verbally-
impaired
Text message
transmission, text
message receiving
Operator
required
TTY +
Talk
For hearing-
impaired
Able to
talk
Voice transmission,
text message
receiving
Operator required
TTY +
Hear
For verbally-
impaired
Audible
Text message
transmission, voice
receiving
Operator required
TTY Off
Voice transmission,
voice receiving
TTY Mode (Tele Type writer)