Cloning procedures (cont.) – LG 47LD650H User Manual

Page 149

Advertising
background image

30

206-4137

Cloning Procedures (Cont.)

Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer

Learn Setup from Master TV
1. Ensure the Master TV is set up completely and the EBL is in Pass-

through Mode.

2. If an analog channel is not available, tune the TV to an Aux source, such

as AV-1. Then, plug one end of the MPI cable into the TV MPI port.

3. Turn ON the TLL-1100A.
4. Use the

MODE button on the TLL-1100A to select Clone Mode.

5. Use the Left/Right arrows on the TLL-1100A to select the Memory CBank

(1 to 8) in which to store the Master TV Setup.

6. Plug the other end of the MPI cable into the MPI port on the bottom of the

TLL-1100A. The Clone Selection Menu will display on the TV screen.

7. Press

1 on the Installer Remote to select LEARN FROM TV from the

Clone Selection Menu. Then, press ENTER to transfer the Master TV

Setup into CBankX on the TLL-1100A.

Learning usually takes about 90 seconds. “LEARNING IN PROGRESS”

will be displayed on the screen while the TLL-1100A copies the Master

Setup. When the Learning process is complete, a “LEARNING COM-

PLETE” message will be displayed.

Cloning is accomplished using the TV/

clone programmer MPI ports for com-

munication (see figure).

TLL-1100A Cloning Notes
• Read the IMPORTANT CLONING

INFORMATION on page 28 before

beginning any cloning procedures.

• Ensure the TLL-1100A is either fully

charged or connected to AC power.

• Teaching and Learning is only pos-

sible between identical model TVs/

STBs; however, the TLL-1100A clone

programmer can store up to eight

different Master TV Setups.

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

-

-

To change menu items, press

channel keys or digits.

To execute item, press Enter.

Warning: Do not connect a clone programmer to any PPV card installed in the Master TV or

any MPI port while the TV is in PPV Mode, or the clone programmer and the PPV card will be

damaged.

Antenna

or CATV

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

TV Link

Loader

TLL1100A

Ready

TLL-1100A

ENTER

RECEIVE

SEND

MENU

MODE

CHARGE

MPI

Cable

TLL-1100A Clone

Programmer

Advertising
This manual is related to the following products: