LG 47LD650H - Manual (Page 154)

35 206-4137
XXLG710H PTC INSTALLER MENU
000 INSTALLER SEQ 000
UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00
Reference: Upgrading TV/PTC Software with a USB Memory Device
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV
Upgrading TV/PTC Software
Before you begin, note that the software
upgrade files must be stored in a folder
named “LG_DTV” in the root directory of
USB memory device.
1. Turn the TV ON.
2. Plug the USB memory device into the
USB IN port on the TV. Note: Ensure
the memory device has been format-
ted with FAT format.
3. Press MENU to display the TV setup
menus.
4. Use the arrow navigation keys to se-
lect/highlight the Option menu icon;
then, press the number “ 7” key a total
of seven times to display the USB
Download Menu.
5. Use the Up/Down arrow keys to
select Upgrade TV Software or Up-
grade PTC Software, as applicable,
and press ENTER. (See screen
samples at right. The TV Software
Upgrade screen provides information
on the current software as well as the
potential software to be downloaded.)
6. Use the Up/Down arrow keys to
select/highlight the upgrade to install
and press ENTER.
Copying progress will be shown. When
the upgrade is complete, the TV will turn
OFF.
Checking the Software Versions
You can check the software versions of the
TV by accessing the Installer Menu: Press
MENU repeatedly until the on-screen menu
locks up, and then press 9-8-7-6 + ENTER.
When you are finished, press ENTER again to
exit the Installer Menu.
Typical Installer
Menu
CPU Version PTC Version
TV Software Update
[ Current TV Software Version Information ]
epak : 3.0b.0 rootfs(RELEASE) : 0.00.1
model(RELEASE) : 3.12.0 emanual(RELEASE) : 0.00.1
ezcal(RELEASE) : 3.0b.0 kernel(RELEASE) : 3.12.0
lgfont(RELEASE) : 3.12.0 micom(RELEASE) : 0.d0.b8
710H_V3.31_usb
i
cpak : 3.31.0 lgapp(RELEASE) : 3.31.0
lgres(RELEASE) : 3.31.0 model(RELEASE) : 3.31.0
ezcal(RELEASE) : 3.31.0 boot(RELEASE) : 0.00.1
kernel(RELEASE) : 0.00.1 rootfs(REA/LEASE) : 0.00.1
Upgrade PTC Software
PTC_xx710H_v1.00.014
i
The following software files are found in the memory card.
TV Software Update
27%
UPGRADING...
Do not unplug!
!
Upgrade PTC Software
25%
UPGRADING...
Do not unplug!
!
TV Software Update
[ Current TV Software Version Information ]
epak : 3.0b.0 rootfs(RELEASE) : 0.00.1
model(RELEASE) : 3.12.0 emanual(RELEASE) : 0.00.1
ezcal(RELEASE) : 3.0b.0 kernel(RELEASE) : 3.12.0
lgfont(RELEASE) : 3.12.0 micom(RELEASE) : 0.d0.b8
710H_V3.31_usb
i
cpak : 3.31.0 lgapp(RELEASE) : 3.31.0
lgres(RELEASE) : 3.31.0 model(RELEASE) : 3.31.0
ezcal(RELEASE) : 3.31.0 boot(RELEASE) : 0.00.1
kernel(RELEASE) : 0.00.1 rootfs(REA/LEASE) : 0.00.1
Upgrade PTC Software
PTC_xx710H_v1.00.014
i
The following software files are found in the memory card.
TV Software Update
27%
UPGRADING...
Do not unplug!
!
Upgrade PTC Software
25%
UPGRADING...
Do not unplug!
!
TV Software Upgrade PTC Software Upgrade
Note: (TV Software Upgrades only) If the TV detects a later version
of software on the USB device, it will automatically display a dialog
from which you can start the software upgrade immediately.
Otherwise, you can close the dialog, and access the USB Download
Menu as described in the procedure.