Appendix, Troubleshooting – LG 47LD650H User Manual

Page 96

Advertising
background image

APPENDIX

96

TROUBLESHOOTING

APPENDIX

A

Ab

bnno

orrm

maall O

Op

peerraattiio

onn

V

Viid

deeo

o PPrro

ob

blleem

mss

No picture &No sound

No or poor color

or poor picture

Poor reception on

some channels

Lines or streaks

in pictures

No picture

when connecting HDMI

Horizontal/vertical bars

or picture shaking

Picture appears slowly

after switching on

The remote control

doesn’t work

Power is suddenly

turned off

Check to see if there is any object between the product and the remote control
causing obstruction. Ensure you are pointing the remote control directly at the TV.

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

Ensure that the correct remote operating mode is set: TV, VCR etc.

Install new batteries.

Is the sleep timer set?

Check the power control settings. Power interrupted.

Check whether the product is turned on.

Try another channel. T he problem may be with the broadcast.

Is the power cord inserted into wall power outlet?

Check your antenna direction and/or location.

Test the wall power outlet, plug another product’s power cord into the outlet
where the product’s power cord was plugged in.

This is normal, the image is muted during the product startup process. Please
contact your service center, if the picture has not appeared after five minutes.

Adjust Color in menu option.

Try unplugging any others electronics that are near by to see if interference is
causing the problem.

Try another channel. T he problem may be with the broadcast.

Are the video cables installed properly?

Activate any function to restore the brightness of the picture.

Check for local interference such as an electrical appliance or power tool.

Station or cable product experiencing problems, tune to another station.

Station signal is weak, reorient antenna.

Check for sources of possible interference.

Check antenna (Change the direction of the antenna).

If the HDMI cables don’t support High Speed HDMI, it can cause flickers or no
screen display. In this case use the latest cables that support High Speed HDMI.

Advertising
This manual is related to the following products: