LG W2252TQ-TF - Manual (Page 22)

A21 A21
Specifications W1952TQ
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
Tilt Range
Power Input
Environmental
Conditions
Stand Base
Signal cable
Power cord
19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.285*0.285 mm pixel pitch
Horizontal Freq. Analog : 28 - 83 kHz (Automatic)
Digital : 30 - 83 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital (HDCP)
Signal Input 15 pin D-Sub Connector
DVI - D connector (Digital)
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max Analog : VESA 1440 x 900 @75 Hz
Digital : VESA 1440 x 900 @60 Hz
Recommend VESA 1440 x 900 @60 Hz
DDC 2B (Digital), DDC 2AB (Analog)
On Mode : 36 W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 45.15 cm / 17.78 inches 45.15 cm / 17.78 inches
Height 38.60 cm / 15.20 inches 35.30 cm / 13.90 inches
Depth 22.00 cm / 8.66 inches 7.80 cm / 3.07 inches
Net 3.9 kg (8.6 lbs)
Tilt -5˚~20˚
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached( ), Detached ( O )
Attached( ), Detached ( O )
Wall-outlet type or PC-outlet type