LG BD430 - Manual (Page 23)

23
Basic operation
Turning on the projector
1. Complete peripheral connections (with a
computer, VCR,etc.) before turning on the
projector.
2. Connect the projector’s AC power cord into an
AC outlet. The POWER/TEMP indicator turns
red. Open the lens cap.
3. Press the POWER button on the top control
or on the remote control. The POWER/ TEMP
indicator becomes green and the cooling
fans start to work. The preparation display
appears on the screen and the countdown
starts.
4 If the projector is locked with a PIN code, a PIN
code input dialog box appears. Enter the PIN
code as instructed below.
√ Note:
● When the logo option is set to be "Off” ,
the logo will not be displayed on the screen.
● When the display option is set to be "Off,”
the logo and countdown will not be displayed
on the screen.
● During the countdown period, all operations
are invalid except shutdown.
Enter a PIN code
Select a number by pressing the ▲▼ buttons,
and then press the ► button to fix the number
and move the cursor. The number changes to "*".
If you fixed an incorrect number, move the cursor
to the number you want to correct by pressing the
◄ button, and then select the correct number by
pressing the ▲▼ buttons.
Repeat this step to complete entering a three-digit
number.
After entering the three-digit number, move the
cursor to "Set", then you can start to operate the
projector.
If you entered an incorrect PIN code, the "PIN
code" and the number (***) turn red. Enter the
correct PIN code all over again.
What is PIN code?
PIN (Personal Identification Number) code is a
security code that allows the person who knows
it to operate the projector. Setting the PIN code
prevents unauthorized use of the projector.
A PIN code consists of a three-digit number. Refer
to the PIN code lock function in the Option menu
on pages 49 for locking operation of the projector
with your PIN code.
Move the cursor to Set, and press OK.
√ Note:
The projector will automatically power off within
3 minutes while you input an incorrect PIN code
or there is no any operation after turning on the
projector.
Caution on handling the PIN code
If you forget your PIN code, the projector can no
longer be started. Take a special care in setting
a new PIN code, write down the number in a
column on page 64 of this manual and keep it
at hand. Should the PIN code be missing or
forgotten, consult your dealer or service center.
PIN Code
Set
---- Adjust Move -----
Clear
* 1
PIN Code
Set
---- ----- Move Select
Clear
* * *