LG BD430 - Manual (Page 24)

24
Basic operation
Turning off the projector
1 Press the POWER button on the top
control or on the remote control, and “Power off?
Please press Power key again” appears on the
screen.
2 Press the POWER button again to turn
off the projector. The POWER/TEMP indicator
starts to flash orange, and the cooling fans keep
running.
(You can select the fan’s running speed.)
3 When the projector has cooled down enough to
be turned on again, the POWER/TEMP indicator
stops flashing.
“Power off? Please press Power key again”
disappears after 4 seconds.
To maintain the lamp life, once you turn
the projector on, wait at least 5 minutes
before turning if off.
Do not operate the projector continuously
without reset. Continuous use may result
in shortening the lamp life. Turn off the
projector and let it stand for about one hour
in every 24 hours.
√ Note:
● When the Auto Power function is “On”, this projector is turned on automatically by connecting the AC
power cord to AC outlet.(Page 47)
● The running speed of cooling fans is changed according to the temperature inside the projector.
● Do not put the projector in a case before the projector is cooled enough.
● If the POWER/TEMP indicator flashes or emits a red light, see “POWER/TEMP indicator”.(Page 52)
● While the POWER/TEMP indicator is flashing in orange, the lamp is cooling down and the projector
cannot be turned on. Wait until the POWER/TEMP indicator turns red to turn on the projector again.
● The fan rotation will terminate directly if the AC power cord is unplugged immediately after the
projector is turned off.
● The projector can be turned on after the POWER/TEMP indicator turns red. The waiting time to restart
will be shortened when the normal power-off processing for fan cooling is completed, comparing with
the time the AC power cord is immediately unplugged after the power-off.
Power off?
Please press Power key again