LG BD430 - Manual (Page 33)

33
Computer input
Auto PC adjustment
Auto PC Adjustment function is provided to automatically adjust Phase, Total dots, H position and V
position to conform to your computer.
Menu operation
Auto PC adjustment
1 Press the MENU button to display the on
screen menu. Use the ▲▼ buttons to select the
PC adjust icon and press the ► button or OK
button.
2. Press the ▲ ▼ buttons to select AUTO PC
Adjustment, and then press the OK button.
To store the adjusted parameters
The system parameters adjusted in the Auto PC
Adjustment can be stored in the projector.
PC adjust menu
PC adjust icon
√ Note:
● Phase, Total dots, H Position and V Position of some computers cannot be fully adjusted with this
Auto PC adj. function. When the image is not provided properly with this operation, manual
adjustments are required.
● Phase, Total dots, H and V Position are disabled when Pixel Clock is higher than 140MHz.
● The Auto PC adj. cannot be operated when 480i, 576i, 480p, 576p, 720p or 1080i is selected
in the PC System Menu.