LG BD430 - Manual (Page 39)

39
Video system select
1. Press MENU on the remote control to display
the on-screen menu. Press ▲▼ to select the
icon for input source. Then press ► or press
OK.
2. Press ▲▼ to select “Component ”, “Video” , or
“S-video ” , and then press OK.
3 Press ▲▼ to select the system, and then press
► or press Select. Press ▲▼ to select the
signal format, then press OK.
Video Input
Video or S-video
Auto
Component video signal format
Auto
The projector can automatically detect the input
video system.
If the projector can’t reproduce the image, you
should select a specific component video signal
format from 480i, 576i, 480p, 576p, 720p and
1080i.
The projector can automatically detect the input
video system and optimize its own state.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
The projector if can’t reproduce the image, you
should select a specific signal format from PAL,
SECAM, NTSC, NTSC 4.43, PAL-M and PAL-N.
Component
√ Note:
● If HDMI is selected, Video system menu will be disabled.
Video System Menu (Video or S-video)
Video System Menu (Component)
Remote control
2930058502
MENU
button
Top control
AUTO INPUT
OK
/
MENU
MENU
button