LG BD430 - Manual (Page 41)

41
Video Input
Image adjust
1. Press MENU button on the remote control
to display the on-screen menu. Press ▲▼ to
select the image adjust icon. Then press ►
or press OK.
2. Press ▲▼ to select the item to be adjusted,
and then press Select. At the time, the
adjustment dialogue box will appear. Press
◄►to set the value.
Contrast
Press ◄ to decrease the contrast and press ► to
increase it. (from 0 to 63)
Brightness
Press ◄ to decrease the Brightness and press ►
to increase it. (from 0 to 63)
Color
Press ◄ to decrease the color gamut and press
► to increase it.((from 0 to 63).
Tint
Press ◄► to select the appropriate tone for the
image.(from 0 to 63)
Red(White balance)
Press ◄ to make the red color lighter and press
►to make it stronger.(from 0 to 63)
Green(White balance)
Press ◄ to make the green color lighter and press
► to make it stronger.(from 0 to 63)
Blue(White balance)
Press ◄ to make the blue color lighter and press
► to make it stronger.(from 0 to 63)
Sharpness
Press ◄ to soften the image and press ► to
sharpen it.(from 0 to 15)
Gamma
Press ◄► to adjust the grey level to achieve
better contrast and balance.(from 0 to 15)
Image adjust menu
Image adjust icon
Noise reduction
Enable this item to reduce the snow
interference and achieve more smooth and clear
image.
Progressive
The interlaced video signal can be converted into
images in a progressive manner. You can select
one from the options below:
OFF: Disabled;
L1: Projecting dynamic image;
L2: Projecting still image;
Film: This item is used for watching films. When
it is selected, This projector will restore the images
with high quality to reduce image distortion.
√Note:
- Noise reduction and Progressive can not
be selected when 480p, 576p, 720p and 1080i
signals are coming.
- NTSC and NTSC-4.43 Color standard system
support this tint menu.