LG BD430 - Manual (Page 51)

51
Information
Displaying input source
The information menu is used to detect signal of projected image and running state of the projector.
Direct operation
Press INFO button on the remote control and the information menu will appear on the screen. Shown as
the right picture.
Menu operation
Press MENU button to display the screen menu. Press ▲▼ to select information icon, the information
menu will appear and the information is displayed.Shown as the right picture
See below for displayed information.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is
displayed in KHz, or - - - -KHz when no signal.
V-sync freq .
The vertical frequency of the input signal is
displayed in Hz, or - - - - Hz when no signal.
Numbers of Hz doubles when during Interlace.
Lamp Mode
The selected lamp mode is displayed.
Screen
The selected screen size is displayed.
Language
The selected OSD language is displayed.
Lamp Time
The used time of the lamp is displayed.
Power management
Turns off the projection lamp when the projector is
not operated for a certain period.
Sleep Timer
This function is used to set a specified time to turn
off the projector even if there is operation or signal
input.
Key lock
The Key lock state is displayed. (Off, Remote
Control or The projector)
Information menu
Information menu
Sleep Timer Off
33.7
60
----- -----