Hippo Wireless Stereo Headphones for Mobile Professionals - Manual (Page 18)

4. In case a Pass Key (PIN Key) request is displayed on your Bluetooth stereo device,
provide '0000' as the PIN key. The PIN key on the headphones are pre-configured as
'0000'.
5. Once pairing is successful, you can establish connection following the procedure
provided for your Bluetooth stereo device.
6. Play music on your Bluetooth stereo device. You should now be able to hear music on
the headphones.
Note 1: The iWiSH headphones are compliant with the Bluetooth specification 1.2
supporting Advanced Audio Distribution Profile(A2DP) and Audio Video Remote Control
Profile (AVRCP). However, interoperability between the iWiSH headphones and other
Bluetooth-enabled products is not guaranteed because it depends on compatibility.
Check with the manufacturers of other devices to determine their compatibility with this
device.
Note 2: Remote control features like 'Next Track', 'Previous Track’ and ‘Play/Pause'
require support in Bluetooth stereo device. The Bluetooth stereo device must support
Audio Video Remote Control Profile (AVRCP) for remote controls to work. In case the
Bluetooth stereo music device does not support AVRCP capability, pressing the
Multifunction button would mute the music on the headphones instead of pausing the
music on your Bluetooth stereo device. To unmute, press Multifunction button again on
the headphones. Volume +/- remote control will work on the headphones even if remote
control is not supported on the Bluetooth stereo device.
18